Introduction of Ultrasonic Cleaner
Oily dirt, such as anti-rust oil, lubricating oil, fuel oil, and certain animal and vegetable greases, is easy to adhere to metal surfaces during processing, storage, and transportation. In various metal surface treatments, the removal of oil stains is very important, which is directly related to the success or failure of the entire treatment process.
Kaidi brand KD-L313 ultrasonic cleaner is a special water-based ultrasonic cleaner. It has strong penetration, dispersion, solubilization and emulsification, and has a good cleaning ability on grease and dirt. Its degreasing, decontamination and washing ability is super strong. The product does not contain inorganic ions, is antistatic, easy to rinse, has no residue or very little residue, can be cleaned with low foam, can improve working conditions, and prevent environmental pollution; and can effectively protect the surface of the material to be cleaned while cleaning erosion.
Kaidi brand KD-L313 ultrasonic cleaner characteristics:
Outside view: light green transparent liquid
pH value: 9.0～10.0 (100% stock solution)
Relative density: 1.00～1.10
Anti-rust performance〔35±2℃ RH(95±2)% 24h〕: cast iron ≤1 grade
Kaidi brand KD-L313 ultrasonic cleaner use:
Kaidi brand KD-L313 ultrasonic cleaning agent is suitable for hardware, metal precision parts, electroplating parts, electronic parts, bearings, stamping parts, auto parts, motorcycle parts, bicycle parts, machinery manufacturing And the cleaning of various heavy oil pollution in industries such as repair, automobile manufacturing and repair, agricultural machinery repair, mechanical equipment repair and maintenance.
Kaidi brand KD-L313 ultrasonic cleaner use characteristics:
Environmental protection: This product is a new generation of environmental protection products without phosphate and sodium nitrite. No harm to the human body, no pollution to the environment.
Safe and non-flammable: This product is a water-based product, which is safe to store and use.
Period anti-rust: The anti-rust performance of this product to cast iron is ≤1 grade, which fully meets the requirements of inter-process anti-rust.
Kaidi brand KD-L313 ultrasonic cleaning agent use method:
The use concentration of spraying, ultrasonic, soaking, manual cleaning, etc.: 2-5%; cleaning temperature 60-80℃.
This product can be cleaned by a variety of process combinations:
1, spray-(washing-anti-rust -) blow dry.
2, spray—ultrasonic (—washing—anti-rust)—blow dry.
1. It is not advisable to soak the parts in this product for a long time.
2. This product can be used repeatedly, and the tank should be prepared at a concentration of 3-10% for the first time. However, as the number of treatments continues to increase, the concentration of the bath solution will gradually decay. Therefore, when the concentration is lower than 3%, the original solution should be refilled in time to reach the specified concentration and continue to use.
If you have product needs and questions, please call Shandong Kaidi Chemical Industry Cleaning Division Technical Center to request a cleaning plan and quotation. The manufacturer directly supplies customers to the factory, focusing on industrial chemical cleaning for ten years, and the product quality and technical strength are 100% guaranteed!