Hotline

Delayed Catalyst SA-1

Overview:

Name: Delayed Catalyst SA-1

Alias: Delayed Catalyst SA-1, SA-1, Catalyst SA-1, Polyurethane Catalyst SA-1, Polyurethane Delayed Catalyst SA-1, Tertiary Amine Delayed Catalyst

NTCAT SA-1 is a tertiary amine catalyst with low emission delay, especially recommended for use with low activity aliphatic isocyanate;

NTCAT SA-1 can strongly promote microcellular foams, self-skin foams, coatings, adhesives, sealants and elastomers under thermal activation For the reaction of carbamate, the thermal activation temperature is generally in the range of 50-70;

NTCAT SA-1 is also mainly used as a curing agent for epoxy resins, and it can also be used as a latent curing accelerator for epoxy. NTCAT SA-1 is mainly used for light-emitting diodes. Coils, transformers, diodes, triodes, integrated circuits, casting and packaging accelerators and epoxy powder coating accelerators.

Brand NEWTOP
alias sa-1
effective substance content 99%
Product specifications 180kg/barrel
Executive standards International standard
Main purpose Polyurethane catalyst, epoxy resin promotion
Delayed Catalyst SA-1 Polyurethane catalyst SA-1 Catalyst SA-1

Product description:

SA-1 catalyst is a heat-sensitive polyurethane catalyst that delays the reaction. At room temperature, the activity of SA-1 catalyst is very low, and under the condition of increased heat, the activity can be increased rapidly, which is close to the activity of metal salt catalysts.

In the conventional amine catalyst system, SA-1 has little effect on the initial reaction rate and fluidity during the foaming process, and it mainly acts in the late stage of the foam reaction. , Can greatly accelerate the curing time, thereby shortening the demolding time.

The appearance of this product is light gray liquid, low viscosity, slight amine odor, easily soluble in water, and soluble in most organic solvents. It is easy to absorb carbon dioxide and moisture in the air, so please close the lid tightly and store it in a sealed condition.

delay catalyst  SA-1 polyurethane catalyst SA-1 catalyst SA-1

Delayed Catalyst SA-1 Polyurethane Catalyst SA-1 Catalyst SA-1

Application:

SA-1 is recommended to be used together with other conventional catalysts. In the self-skinning system: it can shorten the demolding time, improve the production efficiency and does not affect the early milking time; also It can be used in the formulation of 141B foaming, full water foaming and rigid foam board system.

Storage and transportation:

Should be sealed and stored in a dry, cool and ventilated warehouse.

Packaging:

180KG/bucket Storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent the product performance from being mixed with other substances such as waterproof grade. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, take a shower and change clothes. Store contaminated clothes separately and use them after washing. Maintain good hygiene habits.

Tags:
Prev:
Next: