Curing machine cleaning agent
The vulcanizer is divided into three types: electric heating, steam heating and heat transfer oil heating. During the normal use of the heat transfer oil vulcanizer, a series of physical and chemical changes such as viscosity, residual carbon, acid value, etc. will occur after the heat transfer oil is used for a long time, and a large amount of The coking, carbonization and other fouling of the gas will affect the normal use of the system to a certain extent, resulting in a decrease in flow rate and insufficient heating temperature, which will have a certain impact on production equipment. If the heat of the hot press board is uneven, the hot press board cannot be used normally. For this reason, effective cleaning means must be used to remove the coking and carbonization of the inner wall of the heat transfer oil hot press to make the temperature uniform.
According to the actual operating environment of the heat transfer oil vulcanizing machine, Hebei Aijie has developed a heat transfer oil cleaning agent product suitable for the cleaning of the heat transfer oil vulcanizing machine after years of hard work. :AJ-2-121 thermal oil vulcanizing machine cleaning agent product.
AJ-2-121 heat transfer oil vulcanizing machine cleaner is a special type of heat transfer oil used as a heating medium. After a period of use, the oil coking scale and carbonization scale in the system are effective. Clear professional supporting medicament. It peels and dissolves grease and other mineral deposits through strong penetration, peeling and dissolution, so that they are suspended in the liquid medicine and discharged. It can effectively solve the uneven heat transfer of the hot press plate, and can also wash away the charring and coking particles mixed in the grease. Ensure that the descaling rate is above 98.7%, and the equipment will not cause any corrosion and adverse effects during the cleaning process, which is safe for the human body.
Product features: (This product has a solvent odor, colorless and transparent liquid, specific gravity: 1.15±0.05, non-burning.)
1. Safety: non-toxic, non-corrosive and non-flammable.
2. It is easy to use, without heating and mechanical stirring.
3. Economy: It can be used repeatedly.
4. Non-combustible, non-explosive, non-toxic and harmless, as well as fast dissolution rate and low volatilization rate are the typical features of this product.
5. The speed of dissolving coke is much higher than that of similar products, and the speed of volatilization is much lower than that of similar products.
Scope of application:
Removing grease and carbon deposits in hot oil furnaces, pipelines, and heat transfer oil systems.
How to use:
1. Drain the remaining heat transfer oil from the system.
2. Link the platen press with the external circulation pump and the circulation pool to form a circulation system.
2. Add AJ-2-121 heat transfer oil vulcanizer cleaning agent to the circulating pool After that, cycle cleaning for 2-4 hours, and then discharge the cleaning waste liquid. If the carbon layer exceeds 4-5 mm, the soaking and cycle cleaning time can be extended to 4-6 hours. Note that when discharging, be sure to maintain a certain pressure in the system so that the fallen carbon deposits can be discharged smoothly and avoid clogging the pipeline.
3. Heat-conducting oil vulcanizing machine cleanerAfter cleaning, there is no need to rinse with water. After the surface is dry, directly add heat-conducting oil and start the machine.
If you have product needs and questions, please call the technical center of the Industrial Cleaning Division of Aijie Energy to obtain a cleaning plan and quotation. The manufacturer directly supplies customers to the factory, and the product quality and technical strength are 100% guaranteed! aijienengjyw