pu elastomer release agent

product name: pu elastomer release agent
code: silibasera-4311
description:
silibasera-4311 pu elastomer release agent is the organ silicone and teflon mixed liquid, excellent heat stability and chemical stability, good at remold and isolation effectiveness, non-corroding and without residual on the mould and good at mould surface, not influence the product’s adhesiveness and paint, not pollute the mould. silibasera-4311 pu elastomer release agent is concentrated of high pure silicone, avirulent insipidity, high lashing point for safety usage.
main application:
polyurethane elastomer products, pu rubber covered roller, pu seal ring release agent.
standards of silibasera-4311 pu elastomer release agent:
● appearance：colorless transparency liquid
● density：0.96-0.98 g/ml
● effective constituent：100%
● viscosity：100-200 (mpas/25℃）
● flashing point：≥300℃
● dilution ratio (by weight)：1:20 diluted with gasoline or naphtha or n-hexane
● working temperature：30~180℃
application method:
● clean the mould and warming the mould up to 50℃.
● use release agent after dilution (1kg mixed 20kgs solvent) and use the brush or spray gun to coat on the mould uniformly which can produce after the solvent volatilize.
● the quantity of use is based on the complexity and material of mould, normally pu elastomer need to spray 2-3 times.
● in order to have a better disperse on the mould surface, suggest to using the solvent mixture to dilute the release agent.
store & life: at least 12 months under original sealed container during -20℃~50℃. if pass the date, it needs to be used after the check out.
packing: 25kgs/barrel, 170kgs/drum