release agents for die casting molds

product name: release agents for die casting molds
model: silibasera-4zal
usage description:
● the recommended usage (dilution ratio): general processing: 1:120, complex processing: 1:100. please according to the technology personnel deployment test concentration, finally to determine the best dilution ratio!
● the typical usage: 1kg release agent mixed with 100kgs purified water or mixed with 100 ~ 120 kgs diesel oil.
● if b e y o n d the typical usage, please contact us for technical support.
● please use deionized water to dilute, helps to prolong the life of working liquid, reduce the use amount of concentrate, fully reflects the performance of the process fluid. 　　
● unless the technical services allow outside, cannot add other material to concentrate and diluent. after dilution with water, it is milky white liquid.
● the concentration of control may be achieved through the refractometer and refraction coefficient of diluent concentration percentage.
technical indicators of silibasera-4zal release agents for die casting molds:
odor：non strong smell density：0.85g/ml
appearance：transparent red brown liquid working temperature：150℃-200℃
flash point (coc)：not applicable refraction coefficient@20℃：1.2
freezing point：-10℃ ph (5% dilution)：7
notify of silibasera-4zal release agents for die casting molds:
● die-casting mold release agents must dilute with pure water or diesel oil, dilution ratio 1:100 ~ 1:120, gently shake or stir well before use; dilution ratio according to complexity of the casting and mould deep make appropriate adjustments.
● the spray gun or automatic system pay attention to spray evenly and blow dry.
● the best mould working temperature is 150 ℃ to 200 ℃.
● die-casting mould release agent under normal temperature storage, pay attention to prevent frostbite prevent bask in, after opening attention hermetic seal good keeping.
packing and shelf life: 20kgs/barrel, 170kgs/drum, sealed and stored at room temperature for at least 18 months from manufacture date.