Wooden furniture retro antique agent

Wooden furniture retro old agent, wooden table and chair old antique agent, wooden product antique repair agent One: Product performance introduction: The wood fiber can be quickly infiltrated by simply painting or rolling the surface of the wood floor board. A small amount of tannic acid can produce a series of cross-linking reactions to change the original color of the wood, so that the board itself has different chemical changes, so that the surface of the board quickly forms a sense of old vicissitudes. The treated board has the same color and a natural look. The texture is clear, the layering is strong, the color is not easy to fade, the color is natural and a series of advantages. It is widely used in the color modification of the cool color series solid wood flooring of oak, oak, ash, oak, elm and other tree species, and solid wood composite flooring.
Two: Product technical parameters:
This product is divided into ABCDEFGHIJKLM and its structure is single component
A: Effective active matter content: 70% Melting point: 210°C Specific gravity 1.3 Validity period: 5 years
B: Effective active matter content: 65% Melting point: 220°C Proportion 1.2 Validity period: 3 years
C: Effective active matter content: 50% Melting point: 170°C Proportion 1.15 Validity period: 5 years
D: Effective active matter content: 45% Melting point: 190°C Proportion 1.12 Validity period: 4 years
E: Effective active matter content: 40% Melting point: 160°C Proportion 1.1 Validity period: 3 years
F: Effective active matter content: 35% Melting point: 180°C Proportion 1.05 Validity period: 3 years
G: Effective active matter content: 55% Melting point: 140°C Proportion 1.3 Validity period: 5 years
H: Effective active matter content: 45% Melting point: 110°C Proportion 1.2 Validity period: 3 years
I: Effective active matter content: 60% Melting point: 130°C Proportion 1.15 Validity period: 5 years
J: Effective active matter content: 45% Melting point: 150°C Proportion 1.12 Validity period: 4 years
K: Effective active matter content: 40% Melting point: 100°C Proportion 1.1 Validity period: 3 years
L: Effective active matter content: 75% Melting point: 160°C Proportion 1.05 Validity period: 3 years
M: Effective active matter content: 35% Melting point: 130°C Proportion 1.05 Validity period: 3 years
Three: How to use:
1: MZB-TS wood floor modifier can dilute the original solution with tap water according to the actual color of the wood floor. The water ratio can be freely diluted 1:1-10 according to the color depth. The wood floor modifier is Single-component, each chemical modifier can be combined according to different proportions to produce a variety of different cool colors, and the warm color series have a natural retro style. Before operation, ensure that the surface of the board is clean and free of stains. It can be evenly wiped by spraying, coating, soaking, etc., and the wood surface is fully absorbed (completely wetted) as the standard. After natural drying for 2-4 hours, or using the far infrared drying of the wood floor UV coating production line for drying, After drying, the board is sanded with sandpaper above 320 (in the direction of the wood grain) and can be painted or treated with wood wax oil. It can effectively treat 15-20 square meters per kilogram. It is currently light gray, soot, dark A high-quality medicine for cool floors such as grey, blue grey, dark green, teak and so on.
Four: Scope of application: MZB-TS type wood floor changer is mainly used for cold color series and warm color series solid wood floors, solid wood composite floors, solid wood furniture and other surface cold color antiques, and the warm color change process is used for the old treatment.
Five: Matters needing attention:
1: The wood floor modifier is a polymer additive. It should be stored separately from other chemical products to avoid danger.
2: The structure of the wood floor chemical modifier is a single component, and its color is a single independent color. If you need to mix and match during operation, please conduct a small batch test to confirm the color and then mix it in batches. , Once each single-component medicine is mixed, be sure to use it up within 30 minutes to avoid invalidation and cause waste of medicine.
3: Before operation, clean up the dirt on the surface of the board so as not to affect the permeability of the liquid medicine
4: Please wear gloves during operation to prevent the liquid from contacting the skin.
5: Wash the skin with plenty of tap water immediately when it touches the eyes.
6: Keep away from children during operation.