delayed catalyst MP601
Product name: Dabco MP601
Alias: Dabco MP601, delayed equilibrium catalyst, delayed catalyst MP601, Dabco MP601 catalyst, delayed tertiary amine catalyst, high elasticity tertiary amine catalyst
Product description: Dabco MP601
Appearance: colorless to light yellow liquid
Viscosity (25℃, mPa.s): 183.3
Density (25℃, g/cm3): 1.09
Water solubility: soluble in water
Flash point (PMCC, ℃): 84
Hydroxyl value (mgKOH/g): 546
Dabco MP601 catalyst is developed for rapid demoulding polyurethane high resilience (HR) molded foam system, which has balanced tertiary amine that delays polyurethane foaming. Dabco MP601 catalyst provides an effective balanced reaction for complex parts and has fluidity, which can help customers reduce cycle time and improve production efficiency.
Typical physical properties table:
Appearance colorless to light yellow transparent liquid
Specific gravity 1.09
Viscosity@25℃ mPa.s 183
Water soluble at 25℃, completely dissolved
Flash point, ℃ 84
Delayed polyurethane foaming time, with fluidity, can be used in complex molding molds for high resilience sponges
Balanced polyurethane catalyst, wide process operating range
Reduce demolding time to increase productivity
Suitable for various TDI, T/M, M/T and MDI system polyurethane foam parts
Dabco MP601 catalyst can be used to manufacture all types of polyurethane high resilience sponge molded products.
Dabco MP601 catalyst can be combined with other polyurethane catalyst products to achieve process performance.
DABCO MP601 is a tertiary amine catalyst developed for fast demoulding high elasticity (HR) molded foam system with both delay and balance;
DABCO MP601 can provide effective reaction balance and has excellent fluidity and pore opening characteristics. It is used for rapid demoulding system and can help customers shorten production cycle and increase productivity.
Keep unopened for two years
Storage and transportation:
Should be sealed and stored in a dry, cool and ventilated warehouse
200KG/drum Storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent the water and other substances from mixing into the product and affecting its performance. Store in a cool, dry place, keep the container sealed and avoid contact with oxides. Do not breathe dust, avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash it before reuse. Maintain good hygiene habits. Air Chemicals recommends that all polyurethane catalysts be stored in a dry and cool place with proper ventilation. All storage containers must be well sealed to avoid contact with water or other influential substances, because this may change the product in use. Performance. The storage temperature is 10°C to 30°C. Lower or higher temperatures are not suitable and should be avoided as much as possible.