Hotline
Morpholine

Dabco NE600

Overview:

Product name: Dabco NE600

Alias: Dabco NE600, no emission amine catalyst, amine catalyst Dabco NE600

Product description: Non-emission catalyst Dabco NE600 for polyurethane bulk sponge

 

Product properties:

Appearance: light yellow liquid

Viscosity (25℃, mPa.s): 370

Density (25℃, g/cm3): 1.02

Water solubility: soluble in water

Flash point (PMCC, ℃): 137

Hydroxyl value (mgKOH/g): 270

 

Introduction:

Dabco NE600 catalyst is a balanced non-emitting tertiary amine used in the production of low-emission polyurethane foams. Dabco NE600 catalyst can react with the polyurethane matrix, so it will not cause amine emissions.

Dabco NE600 catalyst is used in flexible polyurethane bulk sponge applications to meet Certipur or LGA requirements.

 

Typical physical properties table:

Appearance light yellow transparent liquid

Specific gravity 1.02

Viscosity@25℃ mPa.s 370

Soluble at 25℃

Flash point, ℃ 137

 

Features:

Balanced non-emitted catalyst

Promote urea (water-isocyanate) reaction

Improve foam flow

Can meet Certipur or LGA specifications in flexible foam applications

 

Recommendations:

It is recommended to use Dabco NE600 catalyst in water foaming, dichloromethane (MC) or other bulk polyurethane foam systems that replace blowing agents. Dabco NE600 catalyst is compatible with other commonly used polyurethane catalysts and additives, and is easily miscible with polyols and polyol/water mixtures.

 

Product Usage:

Dabco NE600 is a non-emission amine catalyst used to promote the urea (water-isocyanate) reaction. It will react into the polyurethane matrix, so it will not produce organic volatiles;

Dabco NE600 is also used in flexible bulk foam (polyether and polyester) applications to meet Certipur or LGA requirements;

Dabco NE600 is a non-emission catalyst that can improve foam fluidity and can replace Dabco 33-LV catalyst;

Dabco NE600 can be used in any polyurethane foam system such as water foaming and methylene chloride foaming.

 

Shelf life:

Keep unopened for two years

 

Storage and transportation:

Should be sealed and stored in a dry, cool and ventilated warehouse

 

package:

200KG/drum Storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent the water and other substances from mixing into the product and affecting its performance. Store in a cool, dry place, keep the container sealed and avoid contact with oxides. Do not breathe dust, avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash it before reuse. Maintain good hygiene habits. The company recommends that all polyurethane catalysts be stored in a dry, cool and properly ventilated place. All storage containers must be well sealed to avoid contact with water or other influential substances, because this may change the performance of the product in use. The storage temperature is 10°C to 30°C. Lower or higher temperatures are not suitable and should be avoided as much as possible.

Tags:
Prev:
Next: