cetyl dimethyl tertiary amine
Product name: Dabco B 16
Alias: Dabco B-16, cetyl dimethyl tertiary amine, amine catalyst B16, Dabco B16, soft foam amine catalyst B16, hard foam amine catalyst B16
Product description: Dabco B-16 is an amine catalyst commonly used to improve the curing of various soft and rigid foam skins. It can be used in combination with Dabco NCM in die-cut polyurethane soft block foam; used in polyurethane block sponge hair Dabco B16 catalyst for foam system
Appearance: light yellow liquid
Viscosity (25℃, mPa.s): 9
Density (25℃, g/cm3): 0.8
Water solubility: slightly soluble in water
Flash point (PMCC, ℃): 39.5
Hydroxyl value (mgKOH/g): 0
Dabco B-16 is an amine catalyst commonly used to improve the curing of various soft and rigid foam skins. It can be used with Dabco NCM in die-cut polyurethane soft block foam;
Dabco B-16 can be used for polyurethane whole skin foam, microcellular foam, spray foam and polyurethane die-cut soft foam.
Dabco B-16 catalyst is a tertiary polyurethane amine, which can be used with Dabco NCM to cut flexible block foam in polyurethane system.
Dabco B-16 catalyst is commonly used in amine catalysts to improve the curing of various soft and rigid foam skins, and can also be used in polyurethane self-skin foams and microcellular elastomer systems.
Typical physical properties:
Appearance colorless transparent liquid
Specific gravity 0.8
Viscosity@25℃ mPa.s 9
Water soluble 25℃, insoluble
Flash point, ℃ 40
Increase breathability and foam stability
Improve polyurethane surface curing
Dabco B16 catalyst is used in flexible polyurethane foams, such as furniture furniture sponges, automotive interior sponges; hard foam applications, such as polyurethane insulation pipes, polyurethane insulation boards, polyurethane waterproof coatings, polyurethane sealants, etc.;
Dabco B16 catalyst can improve surface curing and appearance, and reduce skinning.
Keep unopened for two years
Storage and transportation:
Should be sealed and stored in a dry, cool and ventilated warehouse
200KG/drum Storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent the water and other substances from mixing into the product and affecting its performance. Store in a cool, dry place, keep the container sealed and avoid contact with oxides. Do not breathe dust, avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash it before reuse. Maintain good hygiene habits. The company recommends that all polyurethane catalysts be stored in a dry, cool and properly ventilated place. All storage containers must be well sealed to avoid contact with water or other influential substances, because this may change the performance of the product in use. The storage temperature is 10°C to 30°C. Lower or higher temperatures are not suitable and should be avoided as much as possible.