Morpholine / Related Application Product

Bill Anda Molybdenum Disulfide Coating

Biranda molybdenum disulfide coating

Molybdenum disulfide (grease); molybdenum disulfide; molybdenum sulfide; molybdenite; disulfide; molybdenum disulfide; molybdenum disulfide (crayon); molybdenum disulfide (aqueous); molybdenum sulfide (IV).

Molybdenum disulfide (MoS2) lubrication can simultaneously repair the old and benefit the waste. For example, the gap between the cylinder tube and the piston of an automobile engine has been used for a long time, resulting in abnormal noise, window oil, air flow, and insufficient horsepower. A layer of molybdenum disulfide (MoS2) film is sprayed on the piston of the automobile engine, which restores the geometric size of the piston, solves the problem of excessive clearance between the cylinder barrel and the piston, eliminates abnormal noise, oil leakage, and air leakage, and makes the old Pieces are resurrected and can still be used. Similar to the piston and cylinder head guide bushes of hydraulic forklifts, etc.;

Molybdenum disulfide (MoS2) has the characteristics of insoluble in water, acid resistance, alkali resistance, and high mixing resistance. For example, paper machines in paper mills often work under humid and high temperature conditions, so the oil is emulsified by water and lost, causing rapid wear and tear of machine parts, which directly affects production. After using molybdenum disulfide (MoS2) lubrication, the above-mentioned problems are solved.

Molybdenum disulfide (MoS2) has a good lubrication effect under high temperature conditions. For example, the stretching machine for the production of color motion picture film support-the film-based stretching equipment has been working at a high temperature of 200 ℃. In the past, Oil lubrication, because of the high temperature, the lubricating oil is smoked, which seriously pollutes the film base and directly affects the quality of the product. After using molybdenum disulfide (MoS2) for lubrication, oil fume is eliminated and product quality is ensured. The reform of lubricating materials has led to the reform of product design. For example, the copper shell of the ball steaming equipment used in papermaking was lubricated with thin oil in the past. Due to the high temperature (the temperature in the steaming ball is 175°C), the oil film is too thin and the wear is serious, and the phenomenon of shaft and tile grinding often occurs. After adopting molybdenum disulfide (MoS2) lubricant, the design reform was carried out, and cast iron tiles were used instead of copper tiles, which not only solved the phenomenon of shaft grinding and tile grinding, but also saved the country’s significant non-ferrous metals.